EHQS subs

Discussion in 'Car Subwoofers' started by danracer, Sep 8, 2007.

  1. danracer

    danracer Full Member

    hmm ok...and do u think i should change the subs i have now for new ones?
     
  2. aznboi3644

    aznboi3644 Full Member

    I would just get two more of the ones you have now...you aren't pushing a lot of power.

    plus with 4 15s you'll have twice the cone area...that is a HUGE advantage.
     
  3. mrmizcue

    mrmizcue Full Member

    didn't someone say at one time that they saw 2-12's in a good box beat 4-15/18's?
     
  4. aznboi3644

    aznboi3644 Full Member

    Yes...that is possible.

    Enclosure is key though
     
  5. jmenace_thakidd

    jmenace_thakidd Full Member

    as long as you build a good enclosure your gonna be in good shape plus like AZN said your gonna have double the cone area
     
  6. danracer

    danracer Full Member

    ok...well today i was now told that these perform better in "tubes" and what can u guys tell me bout dbdrive amps? are they good??
     
  7. aznboi3644

    aznboi3644 Full Member

    perform better in tubes???

    Never heard a dbdrive amp before

    linky???
     
  8. danracer

    danracer Full Member

  9. aznboi3644

    aznboi3644 Full Member

    haha...thats gay and sounds like a load of bullsh!t

    those amps are overrated and power hogs..they'll work just overrated
     
    Last edited: Sep 20, 2007
  10. jmenace_thakidd

    jmenace_thakidd Full Member

    lol i never heard of subs working better in tubes who in the h3ll told u that lol never heard of those amps before
     
  11. danracer

    danracer Full Member

    well that guy sells lot of audiopipes so he knows bout em so i dont know...and what about planet audio amps???
     
  12. aznboi3644

    aznboi3644 Full Member

    subs are subs...just because he knows a lot about audiopipe doesn't mean that they work "better" in tubes...haha i would have laughed in his face

    Planet Audio amps are good...Ranger used to have four of them in his competition van...stout amps
     
  13. danracer

    danracer Full Member

    how much power rms do i need for 4 audiopipes?? each is 425rms
     
  14. aznboi3644

    aznboi3644 Full Member

    2000 watts should be sufficient.

    Maybe get 3000 watts for when you want to burp it
     
  15. danracer

    danracer Full Member

    okk dont ya think thats too muchh?? cu they are single coil...
     
    Last edited: Sep 20, 2007
  16. aznboi3644

    aznboi3644 Full Member

    you know those ehqs 12's...I burped one of them with 3000 watts for a few seconds and it was fine...was a 60Hz tone though.

    Thermally it was fine...i ripped the tinsel leads off of the terminal board though lol

    I'm sure 4 of those 15s could take on 3000 watts for 2 seconds...the coils shouldn't burn in 2 seconds if they are decent quality
     
  17. danracer

    danracer Full Member

    what can u guys tell me bout this amp?? cuz i dont understand what it says....

    Stetsom SPL 3150

    Channels - 2
    Potency PMPO - 3150W RMS
    Power STEREO
    2 Ohms - 2 x 145W STEREO
    4 Ohms - 2 x 100W
    BRIDGE 2 Ohms - 1 x 210W
    BRIDGE 4 Ohms - 1 x 150W
    Consumption - 300mA to 40A (max)
    Input Tension - 13,8V
    Frequency Response - 20Hz to 30Hz
    Input Impedance - 50 Ohms
    Minimal Output Impedance - 2 Ohms
    Dimensions - 6 x 21 x 26,5 cm
    Weight - 2,91 Kg
     

    Attached Files:

  18. danracer

    danracer Full Member

    i think they say no limit or sumthing on the top
     
  19. aznboi3644

    aznboi3644 Full Member

    stetsom makes some nice amps...Alan Dant just set a new db record of 180.5 db with stetsom amps i believe.

    That amp is not a high power amp though...rated for only 210 watts rms
     
  20. danracer

    danracer Full Member

    ohh ok its that i didnt understand the Potency PMPO - 3150W RMS