/ Register

ported box for 2 15" audiopipes

Discussion in 'Subwoofer Box and Custom Fabrication' started by danracer, Aug 2, 2007.

Page 4 of 20
  1. aznboi3644

    aznboi3644 Full Member

    How did you measure your cutouts for the box??

    not the roundest lol but if they are sealed they'll work

    Take your time for sure...my first box took me like 4 hours cuz I took my time...and it was only a 14x14x14 inch sealed box
     
    aznboi3644, Aug 6, 2007
    #61
  2. electrolytic

    electrolytic Full Member

    Nice cuts lol, i thought i was bad.
     
    electrolytic, Aug 6, 2007
    #62
  3. danracer

    danracer Full Member

    [​IMG]

    [​IMG]
     
    danracer, Aug 6, 2007
    #63
  4. danracer

    danracer Full Member

    now i need to cut the port hole in the baffle board but im afraid to do it my self w/ the jigsaw lol
     
    danracer, Aug 6, 2007
    #64
  5. danracer

    danracer Full Member

    i already screwed up one of the port walls and had to go to homedepot to buy more wood
     
    danracer, Aug 6, 2007
    #65
  6. danracer

    danracer Full Member

    are the bracings ok like that??
     
    danracer, Aug 6, 2007
    #66
  7. danracer

    danracer Full Member

    **** **** **** i just ****ed the damn baffle board fuuuck
     
    danracer, Aug 6, 2007
    #67
  8. danracer

    danracer Full Member

    box w/ top part
    [​IMG]

    the ports...painted red
    [​IMG]

    silicone mess
    [​IMG]

    silicone mess and bad measuremet by the dumbass who cutted the wood
    [​IMG]
     
    danracer, Aug 6, 2007
    #68
  9. aznboi3644

    aznboi3644 Full Member

    If you are using a jig saw...easiest way is to TAKE YOUR TIME

    Draw out the lines and cut it slowly...what kind of blade are you using??
     
    aznboi3644, Aug 7, 2007
    #69
  10. danracer

    danracer Full Member

    wellll i really dont know which blade i was using cause the damn blade broke but it said clean for wood, i drew the lines perfectly but the damn blade moved and thats why i cut it really bad... tody im gonna go to home depot to buy 2 panels of 2x2 and tell them to cut it to the right measurements
     
    danracer, Aug 7, 2007
    #70
  11. danracer

    danracer Full Member

    got the new wood today and we just cutted the circles
     
    danracer, Aug 7, 2007
    #71
  12. danracer

    danracer Full Member

    they are much better than the other circles from the other day....ill post pic in a couple
     
    danracer, Aug 7, 2007
    #72
  13. danracer

    danracer Full Member

    [​IMG] this is the jigsaw blade i used yesterday but the bitch broke
     
    danracer, Aug 7, 2007
    #73
  14. danracer

    danracer Full Member

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    danracer, Aug 7, 2007
    #74
  15. danracer

    danracer Full Member

    [​IMG]

    [​IMG]
     
    danracer, Aug 7, 2007
    #75
  16. danracer

    danracer Full Member

    Damn the hole came out a lil bit larger than the woofer what can i do to stop it from a leak
     
    danracer, Aug 7, 2007
    #76
  17. aznboi3644

    aznboi3644 Full Member

    What you could have done to center the cutouts is just draw an "X"...corner to caddy corner...then that will be the center mark...instead of just guessing.

    Well you can make it a double baffle and recut the sub hole
     
    aznboi3644, Aug 7, 2007
    #77
  18. danracer

    danracer Full Member

    just got the box fully assembled
     
    danracer, Aug 7, 2007
    #78
  19. pedro quiroga

    pedro quiroga Well-Known Member

    pics please
     
    pedro quiroga, Aug 7, 2007
    #79
  20. danracer

    danracer Full Member

    yeah in a sec have to upload them again cuz the lights went out in my whole neighborhood for about an hour
     
    danracer, Aug 7, 2007
    #80
Page 4 of 20