Separate names with a comma.
ooops the last 2 lines are screwed up, sorry im on like 14 beers.
Did you replace the jets when you rebuilt it? You might try going down a size. But the first thing that comes to mind is the ignition may be weak...
ok I reread your post and you stated its a 2 bbl, did it come from the factory with a 2 bbl. What other mods have been done?
What carb you runnning, If I remember right the Dodges should be running the Carter afb. and it should be running a 4 bbl for the trucks.
What subs you running and how do those Profile amps sound??
I had the same problem when I put a blower on my mustang. I was running the msd distributor with the 6AL box. Once that was installed I got a lot...
If I was going to spend that kind of $$$ Id buy the Hifonics XX Colossus II super class D 3200 x 1 @ 2 ohm 2000 x 1 @ 4 ohm you can...
some of the better amps that I have seen lately are the Hifonics. Esp the BXI 1606d or 2006d, they will put out 1100 and 1300 watts at 2 ohms, ive...
go get some 1/4 inch MDF and build a baffle. Cut out a shape of the factory speaker but leave about an inch all the around, then cut a hole in...
I have that same power 550s amp, it is a small chassis and builds a ton of heat make sure you install it in an area that has a lot of air flow...
This was the first system I ever installed, it was in my 89 Z28, I used fosgate 4x6 punch plates in the dash, Polk audio seperates in a kick pod....
Just wondering if anyone has had any doings with a company called ALMANI? Here in socal they are showing up in a lot of shops. has anyone tried...
2 subs that you need to check out before you drop big $$ are the Boston Acoustics SPG 555 or the new Cerwin Vega Strokers. Both are awesome subs...
So basically your buying subs to impress others?? unless ist a show car and on display all the time who cares. Only you because you are paying for...
Whats wrong with kicker. i have a L7 12 inch and it hits like crazy and sounds good doing it. Are you saying you dont want it because its a...
You can also check out your belt tensionier. Sometimes the springs in them get weak and dont put as much pressure on the drive belts as needed...
I agree with aznboi, Bostons stuff is top of the line. Their quality control is one of if not the best in the business. As are their engineers....
I have 2 Boston Pro 12s. they sound awesome and are indestructible.
IMO I would stick to speakers that fit in your location. A5x7 component set is the best for your application. If you buy a 6.5 in set then the...
I think I found the prob. I took the rear channel rcas from the eclipse and ran those to the sub amp. Different rcas and diff jacks from the HU...