Separate names with a comma.
wow.but the 39 volts was its peak.was a continuous 50hz sine wave. i played regular music and it was bouncing from 8.5 all the way to...
well he said the amp put out 29 volts.and that equaled 210 watts.so when i divided that. it gave me 7.214. so i multiplied 7.214 x 39.3 and...
crap its late.got to wake up at 6am.going to disney with my sis and her boyfriend....
that cant be right.cause it absolutly slams now that i have all the rca's pluged into the 4ch amp.(it has a built in low pass out for an outboard...
thats how pawn shops make thier money.is that 250 each or for the pair. i goy my M44 at my local pawn shop for 95 even. i see them on ebay...
ok so i got the splitters for the 4 ch amp and it helped the bass ALOT.measured the voltage and it peaked at 39.3volts this time with the 50hz...
final impedance of the sub is 2 ohm. the meter showed 2.8. ran a 50hz sine wave and got the 25.3volts.peak gain set at just under halfway.sub...
azn is right.anyways there wont be alot of output from the speakers if they are behind the seat.it might just be muffled. heck even a board...
if your camera has one. set the macro on.it will focus at close range.
what about thermal shut down.? put a house fan on it.then go to town(in the drive way).see if it shuts down. just a thought.
put a splitter on the right and left.then get 2 more sets of rca's and plug them into your amps.so one amp will be left the other right.
the L5's should be 450 rms and 900 max.i have a 10.
i know .buy a box for a 6x9 and mount your speaker to an adapter plate then to the box.simple. will that work for you?
ok.did a system voltage check and got some numbers.tell me if they are bad or good. sub amp---25.3volts peak.how many watts would that be?...
ok mine only turns on the daytime lightsand the a/c if i have it on.but not the radio.
i have to aggree with dave.if you do have a standard cab truck.any speaker you put in the back will over power the fronts.being as they will be on...
got to go vik. my sis is in town and she just got home.will talk tomorrow. the alarm works 100%,but when i try to rem start it blows....
yes i think so.also after the 2nd visit the installer wired the rem start to the batt directly.its a rem start/alrm
hey ranger .quick rem start question.when i use my rem start it blows the fuse for the alarm after 5 sec. i've taken it in twice for the same...
15 bucks to cut a hole.little pricey for a 5min jod.
