Separate names with a comma.
you can find one at an audio shop. install it close to the batt under the hood. that one is very important. the power wire goes in to the ends....
how much can you spend for a sealed batt? i was looking on ebay and found some good prices on a few kinetiks.
my guess is that any of those subs will work well in the proper enclosure. do any of those subs specs go with your box?
so all the seems are on the back of the box. cool. when i had my box made he sprayed the box and carpet and rolled the box onto the carpet in...
ok so im gonna guess dual 4's from the model number. 2 dual 4 ohm coils can be wired for a 1 ohm load or 4 ohms. is your amp 1 ohm stable on the...
wow. what play is it.?
maybe a 3rd batt will be in order. two reg ones up front. nothing fancy or pricey,and a sealed batt in the rear.
deff a second batt. the cap wont fix your problem. since you'll need a second batt anyways might as well get it now.
wire 2 tweets to 2 channels and 2 mids to the other two channels and the subs on the sub channel. make sure the tweets will be crossed over very...
3 tens vs two 12's have almost the same cone area (3,10's 235 cu in's) (2,12's 224 cu in's). either way in the right box they could sound nice....
walmart wont have the dash fit. for that you should look online but not crutchfield. maybe as a last resort.
sure you can run the amp at 2 diff loads.
you have the 250/1 right like in your sig? then yes. its correct.
yes wire all the rca's up.
yes you are.lol
i believe so.
you should look online you could save a few bucks
for the dash kit i would look elsewhere first.
no. the harness plugs into the stock radio harness of your car. then you wire up what ever aftermarket radio you have. its easy cause the wires...
not a dumb question. just wire each speaker set to a channel and you will be fine. those speakers are already 2 ohm impedance speakers.
