Separate names with a comma.
it just sounds to me like they are in the wrong type of box for the sound you want.
your second pic did not enlarge what was shown. it went to an angel pic... repost it again so we can see what you speak of.
really? 09 thread... was dead right after it was posted.
i had a 5 ch and it powered my 4 8's just fine... its not that he needs a mono block amp.. he just needs more power to get the sound past the rear...
it has to be the box design/ trunk. if you want it louder in the car you can port thru the rear deck. since you don't have a ton of power your...
don't remove the inverter and i guess it should work.
the 2 8's will have more cone area as one 10... 2 8's = 100 square inches.. 1 10 will be 75 . yo most likely won't hear a difference with the same...
maybe it needs a different adaptor to play vids, and needs to be in park with the parking break applied, and the wire for that needs to be...
absolutely. the more pre amp voltage means you don't have to turn the gain up as high as with a lower voltage head unit. when cranking the gains...
what i meant was ,if its rated at 400rms then its is a 400 watt amp, not an 1850 watt 400 rms amp... it just sounds wrong saying it really......
welcome to the forum.
i think your problem lies in your brand choice. the amp is not of good quality. :no: "The amp is a 1850watt 400rms mono block" this statement...
in all honesty, if you have a properly built enclosure. what ever sub you choose should sound good.
look it up on ebay.. my old PG M44 amp goes from 150 to 400 depending on the seller. the M50's for 100 to 250.
my guess is they may come out to producing roughly the same power either way.
