Separate names with a comma.
You really need to try Windows BBS - Help and Support forum for Microsoft Windows. "A Wealth of Windows Knowledge". These guys are really good....
Thats what I want to do. The box for the car is almost done, its 7.5 cu ft. The port is 2.5-inches by 43.5-inches. The tuning ia around...
As many of you know I will graduate next semester and get out of the car audio business. But a few people seem to think that I should do one...
It should not affect anything. I have done a few dome light supervisions at the dome light.
Those wires wont work. It needs to be 0 closed and a positive voltage open or a positive voltage closed and 0 open. You need to go back to the...
I don't understand why it would be a positve trigger at the door pins, it makes no sense. Any way, you should not need a relay. The alarm should...
You dont need a relay there. Set up the inline diodes on the pin switches first, use an ohm meter to varify that every thing is working. The band...
No relays should be necessary. But didnt you put a relay on the trunk pin to change the polarity? If so keep it there. The relay keeps the trunk...
I think I know what should be behind the radio, one long 8 pin (or was it 9) plug, a square small 8-pin and because it has a seperate CD, another...
Just curious does the radio look like the picture, if so its just a standard Ford Radio, nothing special. All of the crossovers and other work are...
Test these wires and make sure they are door pin switch wires. If they are, cut the green/black and solder in a 1-amp diode with the band side...
Doesnt that car use the standard Ford PAC or CDR radio? I cannot imagine it needing an expensive interface. I will look into it more on Monday but...
You didn't tell me that you had two different door triggar wires. My info only shows one wire. Two triggers will need to be diode isolated not...
Hook the resistor back up. Lets see which trigger is causing the problem. For now disconnect the trunk trigger and lets see if it still goes off...
From what you discribed you shouldn't need that wire. Its purpose is to allow you to activate the remote start using a different keyless, ararm,...
If yo dont have a factory alarm then dont worry about it. I'm not sure what that wire is, I would need a better discription of what it does....
I was talking about the baffles that go behind the speakers. And your talking about what to mount the speakers to. Sorry.
The Pioneer Ipod interface is pretty good too. Personally I think all the speakers should be amped. This way we get the most out of them. In my...
Yes, your domelight will turn on when you unlock or disarm the alarm. But you need an ignition line hooked up, thats how the alarm knows to turn...
I like dome light supervision. You dont need it but its nice to have. Pin 85 goes to the alarm Black White. Pin 86 goes to a constant +12...
