Separate names with a comma.
I personally like the two PowerBass Woofers. The S104D if you need 2-ohm load or the S104 if you need a 4-ohm load. Those woofers are tough and...
I used a 2nd Gen Nano. It was the same iPod that I used with my Kenwood KDC X617 and the KCA iP500. I was the first iPod set-up I ever had and I...
TheViking is right about the fact that a little gap is OK. The sound will "sum" flat if the gap is set right. I've never had good luck with...
And I suggest just the opposite, no high pass, unless your running a 3-1/2 of 4-inch speaker. Any other speaker should be able to handle...
The KCA iP500 will NOT work with the Kenwood KAC BT645U. When its hooked up, the radio sees the "ext media" and then "Resume" is displayed. I...
OK first, The KCA iP500 will not work with this unit. So no rear iPod hook up This unit works well and out off the box, no adjustments made, it...
I always start around 100 or a little lower. I can fine tune it after all other adjustments have been done. Bass on radio at -1 to 0, volume at...
I may have a chance to buy this hood. This is the hood scoop to have. [IMG] I hope I can get it
The bass knob on the HU is typically centered at 100Hz or more. Not good for subwoofers. The bass boost on the amp is typically set much lower....
Just for fun, try this. Turn the bass knob down to -1. Turn your loudness off. Set the radio volume to 3/4 and lets start making our...
Hey, look what came today [IMG] I'll put it in this weekend
I have had really good luck with Planet Speakers, and don't be afraid to drive them hard. They can take it. But I'm curious about the bottoming...
That would be really cool, but just too long of a drive. I'm gonna pick up a hood on Saturday and look around for an SVO Mustang hood. My first...
Thanks for the additional info, what happens if you partion the drive up to 32 GB. Will that effect the access time alot? I used an 80GB and...
Here is a link to the Louvers I have not made up my mind 100%. I might decide I need less louvers, maybe 8 to 12, still not sure And here is...
I have had super good luck with Planet Audio, Especially the class D amps. Some of the cheaper speakers had issues, but the middle and upper line,...
Thanks for reponding, I was hoping you would. Anyway, I just tried a magnet and it stuck to the hood.
Before I put the new wheels and tires on the truck, I want to do a little custom work. I have a friend that can weld and I've located a metal...
I love threads with lots of pictures, sometimes I forget to respond in a timely manner. Anyway, here is a 72 Impala I did many years ago [IMG]
And so am I. I have never seen one instance where changing a speaker resulted in louder. Not once. Now, I've only built somewhere between 300...
