Separate names with a comma.
The first thing I would check would be the system ground, make sure you have a good chassis ground on the radio. But I think you already isolated...
The port should always be on the baffle board. In an ideal situation, both the port and the speaker should face toward the rear of the car. Facing...
Your head unit only puts out 15-watts per channel. Many manufacturers stretch the truth alot, but the reality is, 15-watts per channel. There...
! That box is larger than the original, so the port won't work. I'll refigure it out later. Also measure your woofer, 12-inches tall won't work....
A little more room would be nice, but here we go The box will need to be 35-inches wide by 13-inches tall and 13-inches deep. Ya, I need the...
If we stay with the manufacturers recommendations then a box with a height of 14-inches, and a width of 18-inches and finally a depth of...
Yes you can. I've done it once or twice
Yes, velco, so easy to tie Those speakers are absolutely fantastic
Those colors do not sound familiar 1999 Ford Expedition Wiring Colors
Resistors allow us to build cheap crossovers. High value caps cost a few cents more than a low value cap and a resistor. So first you choose a...
I want my midrange/midbass drivers to play as low as possible. I use plenty of dynomat on the door, especially around where the speaker is...
Yes, its PVC and there is one screw in each. There is plenty of Caulk on the back side and I used a 3-1/2-inch hole saw, so the hole size is...
This box is for one of my students, his goal was the loudest system in the High School. No Problem. (he did most of the work, I supervised)...
I've built alot of crossovers. And its really cool when you build one that works well. Example 1 Example 2 Example 3 The different...
Thanks for the update, I always wanna know how things work out and you are welcome. And if you decide to build a custom box let us know.
Ipod, yoou cannot go wrong with an ipod
Porting increases the bass output of the box, and in most cases I recommend porting. The sealed box has the smoothest responce and best...
The port needs to be 9 to 10-inches long. What that means is that from the opening to the end of the port, the measurement is 9 to 10-inches long....
I never liked the port in the middle because it divides the box into two boxes. But because of the depth of the box, your OK. I get what you have,...
Yout usable volume will be less. The port will take up about 1.25 cu ft of your volume. If your port is 15-inches tall then the port will be...
