Separate names with a comma.
Still easy enough to check the speakers. It will only take a minute. Using a test speaker check for sound at one of the non working speaker. If...
The ACC goes to the red wire and the yellow goes to Battery Back Up But to make life easier, lets not cut the factory plug off. NO installer...
My first guess would be that you have some bad speakers that you need to deal with. But first, make sure that you have the correct interface....
Not my intension to talk down to anyone, and if you took it that way then I do sincerely apologize. Sorry. I was just picking on you, no...
I've been building performance sound systems for over 12-years. My design methods were learned from books. The Loudspeaker Design Cookbook by...
OK here we go. The box needs to be 36-inches wide by 13-1/2-inches tall. The box will be 22-inches deep. Before building this make sure these...
The manufacturer usually has a recommended box size that comes with the speaker documentation. If you don't have that you can go to thier website...
For SPL, I always recommend a ported box. And the port should be a little larger than the average port. You have enough power as long as its not...
I wish I had the time. I have so much going on this summer. Take a look at this thread, its almost a step by step on a 56 Chevy I did last...
We only need to turn down the bass and treble while amp adjustments are being made. After the amp adjustments are made, then we can make any...
As far as protecting the speakers a set of XTC Speaker Baffles should do the job well. The MDF only needs to be painted with any decent paint or...
The only issue I see is the crossover. Its a three-way. You only need a two way. I would look for a two way with a crossover point around 5000Hz....
A couple things, the port is taking up space. You must add the port volume to the box volume. If the box volume is 2075 cu in and the port is 320...
Interesting design. Depending on the accuracy of your measurements, your box is between 3.9 to 4.0 cu ft. Hopefully all the speakers share the...
Way too cool, keep it coming.
Either choice would be OK. Or you could make your own Kick Panel [IMG]
The wires should be soldered or you should use butt connectors with crimpers. The connector in the picture is a cheepie designed to fit more...
A DVD will contain three files. The first is the .vob, which contains the mpeg-2 video info. The next files are the .bup and the .ifo, which...
You can find the MTX Data sheet here. It will have a ported box design.
Back in the 70's and 80's, magnet weight was given way to much importance. Its not that big a deal. Two way speakers will do what you need....
