Separate names with a comma.
The subsonic filter has a minimum setting of 15 hz and 35 hz is the max. So, if I set it to 35 hz it would be turned all the way up to the max. Is...
Just built a slot ported box-2.0 cu.ft. @ 35Hz. How should the settings be on my Hifonics bx1000d amp?Lowpass?Subsonic?Bass Boost?
Looks like a pain in the @ss to build a ported box. I am thinking about just adding another type-r and build a sealed box for 2 12's. The amp is a...
Qts=.47 Qms=7.89 Qes=.50 Vas=45L(1.6 cu ft) Fs=29 Hz Sd=480 cm Re=3.7+3.7 Le=3.71mH/1.67mH Xmax=18.2mm The length of Grand Cherokee is 10...
I will probly try to build a ported box then. By the way, it is dual 4 ohm so I have it wired to 2 ohms.
Just installed a new system in my '97 Grand Cherokee. Pioneer Premier head unit ; Mbquart components in front doors and Mbquart 2-ways in rear...
I might try building a ported box as I hear type-r's do better ported vs. sealed. I have never built a ported box , Any ideas where I can find...
You say your lowpass is about 90-100 is that halfway on the bx1000d?? The lowpass dial at minimum is 35 hz and maximum is 250 hz.
The sealed box is about 1.0 cubes.
Hooked up the bx1000d and the bass does not hit that hard. the settings on the amp are : Lowpass about 80; Subsonic at 0; Bass Boost at 0; Phase...
The type-r is in a sealed box so shouldn't I turn the subsonic filter down all the way? I thought that subsonic was mainly for ported boxes?
Just got a hifonics bx1000d for my 12" alpine type-r in a sealed box. Any idea what the settings should be at? It has a Subsonic Filter, Lowpass...
Even though the sub is rated for 500 watts and the amp is rated for 800 watts?? I just don't want to kill the sub and I don't want the bass to be...
I just come across a viper 1200.1 refurb for about $225. Do you think this will be overkill (800 watts @ 2 ohms)??Should I just stick with the...
About 1.0 cubes.
A small sealed box.
I just bought an Alpine type-r 12" sub. It will be wired for 2 ohms. Would the MTX 801D be a good match for this sub??
Don't want to go over $200.
I am looking at a hifonics z500d mono amp. It is an older Zeus model that puts out 500x1 @2 ohms. Just wondering if this is a decent amp for an...
Budget would be about $200 or less. Are you talking about the old or new Kenwood amps?? I thought Kenwood was known for their decks.
