Separate names with a comma.
What he said. Also where is the amp grounded to and how did you ground it?? Do you like Italian BMT's from subway??? They are my favorite...
What subs?? Make?? Model?? Specs?? Specs of amp?? Fuse size of amp??
I use a drill bit that is about the same diameter as the screw's pole/rod thing...not the threads. Works perfect everytime. Also stay atleast 2...
If you got 1500 watts rms output at 1.3 or 2.6 ohms
Pierce Audio Products are pretty hated over on ROE. I forget why. If you want Sound Quality than the WMDs are for you...they aren't really...
You MUST PREDRILL the holes about the full length of the screw. I always predrill and have never had any wood split on me
F3 is right around 30Hz...you'll be fine
if you want more SPL than build a proper ported enclosure for those. Hell two ported will be louder than those three sealed
oh yeah...sorry I've had a couple Type Rs in about 2 cu ft per sub ported...box that I built...tuned around 32 hz and it wanged hard and LOWW...
Same boards....but the quality of the components are prolly different. Like the Soundstream XXX-6500D has the same board as the Lanzar Opti4000D
That amp is crap...don't buy it I will bet my 18Ov.2 and Nine.1 amp that the amp you listed will put out prolly 300-400 REAL undistorted watts
All you would need is a power supply...atleast 15 amps Hook the power wires up and ground wire up...wire it to some speakers and your set...its...
Kole Audio isn't too high quality...its there with audiobomb, pyle, lanzar, rockwood...those cheap amps The Power Acoustik DB series amps are...
Plus money for a good box...which would be atleast 100-175 dollars unless you have the tools and can build one yourself I'd say an Alpine Type R...
prolly the most ballinest action movie EVER
ok this is going into the general because it has to deal with some fuking sweet cars. Just got back from seeing the new movie...
all of Elemental Designs' subwoofers work in IB applications. Elemental Designs The term you are talking about is not free air...free air is...
some parameters would change The net volume would be 5.2 cu ft and port length still 15 inches deep but 2 inches taller would be still tuned...
what sound are you trying to achieve??? How much power do you have to work with and at what impedance??
welcome to the forums...glad to have you here. Don't worry we all started nowhere...stay here and you'll learn quite a lot I have
