Separate names with a comma.
I'd use quality 16 gauge for both
if you want loud and clean I would just get a nice powerful component set and go active something like this should do it Elemental Designs or...
no...its peel and seal window flashing. it works...but doesn't last more than a few years I only used it because i wanted to try it...you can...
there should be directions on how much catalyst to add to the resin then mix it up and pour
I'd stick with the EHQS subs you have now...I used to be all about bass but once you hear a good front stage you'll want it in your vehicle. I'd...
I wouldn't use these for high volume installs...these are entry level. First off how are the speakers you have now installed?? have you...
peak output means NOTHING. the power you want to look at is CONTINUOUS or RMS output. Also you must look at quality brands...cheap brands...
your head unit wont push more than 16 watts x 4 channels. Any decent quality speaker will sound fine if installed correctly
yes...resin takes a long time to dry when its cold...glue takes forever to dry anyways if you pour a big puddle of it
forgot to say...if you ground the amps to the battery and then ground the battery to the chassis...the amps are essentially grounded to the...
what makes resin dry is a catalyst...glue just has to wait for the water to evaporate and dry lol.
Um...did you just pour a bunch of wood glue??? its going to take weeks to dry and it will shrink down QUITE a bit. You should have made MDF...
yes only a fuse between the power wires You can ground the amps to the battery negative Its kinda preference
I've seen that before. SQ sub for sure
you won't like the way head unit power sounds after you have heard speakers powered by an external amp. I have never had my speakers powered by...
I'd wait first...I think you will be happy with those speakers. Also I wouldn't try to push speakers to put out too much bass....thats what a sub...
They can if you install them correctly and solidly. Why are you so set on a sound processor?? I would first buy an amp for the speakers an then...
Alpine SPS-69C2 - pair of 6" x 9" 2-way speakers • aluminum-coated woofer cone with air-injected rubber surround • 1" swiveling silk dome tweeter...
I'd rather opt for a 6.5 inch component set IF you are going the component set IMO I like 6x9s...a lot of people will say different. A nice set...
Be careful with that voltage booster...you can clip your amp and fry your equipment very easily if you do not know how to use it correctly
