Separate names with a comma.
Alright, I'm going to keep my Panasonic CQ-C7103U headunit for now. I'll be using a Sundown Audio SAE-1000D amp to power a single Fi Q15...
My neighbor is selling his 2 Audiobahn Immortal 10's for $150. Do you think I should buy them?
Well as you can see, I'm at 3.9916 cubes right now, so if I did MDF instead of the threaded rods, I'd have to eliminate the 2x4's. I had planned...
[IMG] What do you think?
A guy on termpro said I don't need the double baffle. What do you think?
Well then again I might just do the 1/0 to a fused dist. block that splits into two 4 gauge power wires. Then do a distribution block for the...
The website says: SPECIFICATIONS: * 1000 x 1 watts @ 1 ohm * 600 x 1 watts @ 2 ohms * 300 x 1 watts @ 4 ohms * 0.2v - 6v...
Okay if I use threaded rods I can do 3.9 cubes @ 33Hz.
Gotta get that Sundown SAE-1000D and Fi Q15 goin... Hey the Sundown takes 4 gauge, since that 1/0 gauge enetic I have is pretty small strand...
Neither would I lol. I paid $520 for it new.
stfu lol I'm selling the 2 400.1's and the 2 cvr12's for $500. He won't need a box for a while, but when he does I'll charge him like $50 to...
Well I think I'm going to sell my 2 subs and 2 amps (w/o box) for $500 to my friend. He's going to eventually put them in a titan, so he'll...
[img] (21" tall) 3.75 cubes @33Hz... port is 2.5"x19.5"x25" long... I have .13 cubes left over I need to fill with bracing. How do you guys think...
I took my two 400.1's and subs out. [img] [img] [img] Okay. As of right now the new box's outer dimensions will be 39" wide, 14" deep,...
I'm going to put 1000-1100 watts to it. I didn't realize the port area was the same even though it was flared... back to the drawing board.
But back to the point at hand... would you do 4 cubes @33Hz over 3.25 cubes @33Hz?
I can do 2 3" flared ports and get 4 cubes. The 3" flared ports have a diameter of 6.25" at the flare, so that's 30.68 sq. inches of port per...
delete post
Alright I'm going to increase the height an inch and do some front to back and top to bottom bracing. How long does the port need to be if it's...
Okay, do you think the box has enough bracing with the double-baffle and port walls?
