Separate names with a comma.
Well Excessive Amperage's prices went up $15, but they were still much lower than Ohio Generator's and High Output Alternator's prices. I'm still...
Thanks guys. I'm just going to cover it in the normal gray carpet to match the trunk.
When my engine is running the battery normally reads 13.8 volts on the terminals. I cranked up my engine and it was reading 12.3, then it dropped...
NOTE: The port and front baffle pieces are not attached to the bottom piece yet. I just put them there to give you guys an idea what it will look...
delete post
I emailed Excessive Amperage, Iraggi Alternators, Ohio Generator High Amp Alternators, and High Output Alternator.
Alright, I just emailed Dominick at Iraggi Alternators. I emailed Nate at Excessive Amperage back in August and this is what he said... I sure...
[IMG]
The guy said that my last setup pushing around 1100 watts was probably what killed it... and it just barely lasted until now. I was only pushing...
I was only running the 100.4... the 1000D wasn't even in the car. I got the alternator tested and it's dead... 135A and it's only 2 years old....
Alright we have a problem. Tonight I was driving from Orlando to Jacksonville doing about 85mph in the left lane on I95 and then all of a sudden...
No my amp ground is on the side of my trunk. The metal below my amp rack is my gas tank lol.
Okay...I unplugged ALL the RCA's and my ipod AUX wire from my headunit, turned the key forward (radio comes on but not engine), put the headunit...
and which one is that? lol
Where does the headunit ground plug into on the headunit?
My bad, I wasn't talking about the headunit chassis ground. I was trying to say that when you pull the headunit out and look inside the dash it's...
I think it's more the harness... it has 2 separate massive adapters that clip into eachother... but I don't really know, because I can't see the...
Okay it's either the headunit or the amp. I switched the front and rear RCA's and I still got the noise, but when I unplug the rear channel RCA it...
Okay when I unplug the RCA cable (for the rear speakers) from the amp, the engine noise goes away. It's a Tsunami Elite Series V10-20 cable... the...
[IMG] I cut all the MDF for my box... I still have to cut the 1.5"x3.5" bracing though. The 1.5"x3.5" wood is labeled 2x4... if it's not 2"x4",...
