Separate names with a comma.
OK...Well when you are checking frequency response in your car, you are listening to sane levels...If you want to check to see where your peaks...
Radioshack sells an SPL meter http://www.radioshack.com/product/index.jsp?productId=2103667 You can also pick up a copy of a test CD with...
Nice job...Did you brad nail those?...Looks to small for the holes to be screws..Very nice job on the construction and cutting the holes...Very nice
You have two 4 ohm subs so there are some things you need to look at... If you go cheap, you usually get cheap....You don't have to spend top...
I have been kicking around putting two of my ED 8's in an enclosure up front to act as a midbass....I am waiting on delivery of a set of Polk MM...
It depends on the vehicle and the components and all kinds of factors...I doubt if you will get cancelations but it is possible...If your HU has...
It looks like from the subs description that they are 4 ohm dual voice coil..If each coil is 4 ohm, you can wire them 2 ohm each and run the amp...
I have an 01 Tahoe....I pulled out a clarion unit (was in when I bought it) and replaced with an alpine unit...The clarion had the adaptor that...
Anytime you hear popping or distortion or the sound changing to bad from good, then you are headed towards blown speakers... If you have 100...
Just make sure you use a crossover to feed the subs the right frequencies or it will sound like crap... I ave two old school kicker comp 12's...
Yes....you can... You can use 200 watt speakers with 100 watt receiver...you can use 100 watt speakers with a 200 watt receiver...I have used...
Not sure you can see a tweeter move but as a rule of thumb if you are not sure you can take a 9 volt battery and touch the wire leads to the...
Do you have a test light or a volt meter?
Why didnt you just get a wire harness adaptor for that car? You could have connected the wires from the new head unit to the adaptor, then just...
I believe I may have that amp already sold.... Willy
I got a Kenwood 9152 amp for sale...This is a class D mono amp...500 watts RMS to 4 ohms....900 rms to 2 ohms...1 ohm stable. I believe it is 900...
I have been turning wrenches since 1986...If it were me I would not mention anything about my lack of confidence or being "lost"....if you...
as of right now the in dash player and video monitor are sold...The kenwood amp in the picture is up for sale...it has a remote bass boost knob...
By the way.....updates: all the video stuff came out...HU is now and Alpine 9856...I am switching out the Kenwood 9152 for a JL 450/4...I am...
I think this shows all the parameters on the left when you open it azn http://www.caraudiotalk.com/audio-forum/showthread.php?t=6620&page=6...
