Separate names with a comma.
What size wires for power and ground?Viking you look very swabi and deboner, ready for an evening of horses ovaries
A speaker that can handle 100 watts at 200Hz may only be able to handle 50 watts at 50 Hz. RMS is a Statistical Method of averaging the...
The 1100 was mine,beer and bikes have always been touble for me,last summer was the first time I crashed from just riding stupid,wrote off the...
I was doing brake maintenance on a 1100 Kawasaki,hot day 7 tall boys later went for a test ride , my son and his buddies were in front of the...
Viking your scaring me,You do know if sex is a pain in the ass your doing it wrong.......Anyhow Kris Kristofferson the Austin sessions.
I added a few pictures of my FJ 's stereo progress in the photo gallery,progress is slow as work gets in the way.The wiring will be a lot neater...
Built my box this weekend,3.3 cu ft ,two 4 "ports 6" long=48hz.This box sits on the floor of the FJ,drivers and ports fire up,what happens if I...
years ago I had an 80 chev malibu with eight 8" drivers,.65 cu ft per driver,300 watts ,37.5 watts per8 For some reason I went to four 8's, 75...
I will be running one D200 bridged mono to each 10,240 rms per 10, 4 ohm load,not going with out board eq or x-over,I got a 9855 Alpine with all...
Thanks Viking.I will brace front to rear ,ports close to the divider and drivers centre to each half at the rear.I will have to get some serious...
I'm building a sub floor for two Infinityperfect 10.1's in a FJcruiser,internal dimensions 40.5x27x6 ,3.79 cu ft.it will be 3/4 mdf.after...
If you make two identical boxes,eg both 3 cu ft,in one box you install the drivers both on the front baffle but as far apart as possible.IN the...
Going by his music prefs, I would do four 8's for punch,and a bandpass for shake
My youngest got his first car,a 96 Acura intrega 2 door coupe,on the weekend I installed a Alpine 9853 ran deck power to the front components...
I cant believe I read all 5 pages,Any how forgetting about EMF ,STDs, and DILIGAF. If you can ,separate your wires,keep them as neat and tidy as...
The emits were also used years ago in 6x9 infinities,we would cut them out with a coping saw,I had a pair in my T-bird glued to the windshield 1/3...
In my left hand I have a 6.5 canton mid base driver,in my right hand I have a an emit tweeter,both vintage ,both 3.2 ohm.Yesterday I installed a...
I've got an old TC308 ,tape section was amazing,the tuner was designed by Larry Schotz great quality for local stations but poor for distance,Back...
Whats acceptable vent noise,WinISD says 55fps ,The loudspeaker cookbook say 110 fps max(4th edition 1991)Quite the difference
What I want to do is make a mold for my box out of paper mache,then use the mold to make the glass box,I'm fighting for every cubic inch I can...
