/ Register

Install Diamond M561 without Crossovers

Discussion in 'Car Stereo Speakers' started by Oyiwaa, Mar 11, 2011.

  1. Oyiwaa

    Oyiwaa New Member

    I removed an M561 from my previous car about 6 years ago, and now want to install it in a different car. I realized I probably forgot to remove the crossovers from the old car. I still have the tweeters thought.

    Is there anyway to install these speakers without the crossovers? If so, how ?

    My HeadUnit is an Alpine 103BT: http://www.alpine-usa.com/product/view/cde-103bt/Specs

    and details of the amp (ESX 604) specifications are available at:

    https://docs.google.com/leaf?id=0B9X...thkey=CPfw2-ME

    I hope between the amp and the headunit, I can find a solution.


    Thanks very much - Oyiwaa
     
    Oyiwaa, Mar 11, 2011
    #1
  2. Ranger SVO

    Ranger SVO Full Member

    The tweeters absolutely need a crossover. You can use a single capacitor around a 5.6 to 6.8 micro farad. Make sure its a non-polar electrolytic.
     
    Ranger SVO, Mar 12, 2011
    #2