hc2000 load test

Discussion in 'Automotive Electrical' started by sweetescape, Aug 2, 2010.

  1. sweetescape

    sweetescape Full Member

    I load tested my kinetiks and wasn't sure how much of a load to put on each batt. I put a 200 amp load on each batt for 3 secs and they each held at 11+volts. Any ideas if that's what they should do?
     
  2. 6.5ldiesel

    6.5ldiesel Full Member

    If below 10.5 volts = weak
    If below 10 volts, the battery is junk