Separate names with a comma.
OK,so here's the setting from where I started:gain 1/2,bass boost 0,loudness off,bass on h/u 2,lpf 62hz. This is how it is now:gain 1/4,bass...
If you have a newer alpine h/u,you could get the alpine power pack that hooks right up to the h/u in the back so you don/t have to run...
I'm going to try Rangers way tomorrow,but I have a question:What is a good starting point for the lpf?Right now it's set at 50 or 60 hz and I like...
Good luck,I'm hoping you get it too.That looks like a '86.I think only the turbo 2.3's had the scoop off center and the 5.0's were in the center.
Yes you can,but you'll have more power than you need so set your gain properly.Just the 1 amp is what you need.
Well Ranger,I'll give it a try maybe this weekend.It'll be a couple months before it's warm outside again.
The only problem I've heard of is running them at a 1ohm load,they sometime go into protect mode and never come out.I had a hifonics amp and had...
Thanks for fixing the sub link,the amp link doesn't work.But anyways the Power Acoustik amp you linked earlier gets my vote.I have a different...
What voice coils do you have?Dual 2's or 4's?Those are only 750 watts rms each,so either way I think the 2400 will do just fine.
You can probably use the hpf filter in the h/u to keep the lows out of your door speakers.I would just use the one amp for the subs to make it...
That's a nice amp,but the plant audio or the soundstream would be a better fit in my opinion.I had the alpine mrp 1000 and my lights dimmed a...
For now I would wire to 4 ohms each and connect to each channel just to be safe.Or you could get a 4 channel amp to work,just bridge the front and...
http://cgi.ebay.com/STREAM-RUB1-2500D-MONO-BLOCK-AMP-5000WATT-CAR-AMPLIFIER-/170564617514?pt=Car_Amplifiers&hash=item27b671852a...
What is the model # of your subs?
I have a Power Acoustik PS1-4000d,and I'm very happy with it.Here's a link to a newer,bigger amp:...
I forgot to mention that this box was designed for 3 10" fosgate punch 10's.I wanted it to hit lower and tried a directed sx12 in the box and now...
http://i152.photobucket.com/albums/s193/bromojr/Forum%20Junk/Box%20Designs/Tommy2Tone31432hz.png This is the design that I used for my box.I...
I think the svt scoop I welded on was an add on scoop.I'll have to do some research when I get some free time.
The bass is at +1,no bass boost,the gain was set with a dmm.I really don't know how high it is,but my amp is rated 1200 watts rms at 4 ohms and...
Here's a couple of subs that I was thinking about: http://www.sonicelectronix.com/item_8831_Power+Acoustik+FUBAR-15W.html I would have to find...
