New System in the Grand Marquis (Build Thread)

Discussion in 'General Car Audio Discussions' started by eazy, Dec 3, 2007.

  1. aznboi3644

    aznboi3644 Full Member

    Holy **** 141 lbs?? Damn
     
  2. electrolytic

    electrolytic Full Member

    plus the battery and amps and spare lol
     
  3. eazy

    eazy Full Member

    pair of batteries weigh 108 lbs, I don't know what the amps and spare weigh... let's just say my tips scrape the road quite often lol
     
  4. eazy

    eazy Full Member

  5. eazy

    eazy Full Member

    I got 2 pairs of Infinity Kappa 6x8's (100 rms watts) for $200 from my local shop... talked em down from $260.

    All 4 speakers are installed. I have the gain set at about 40% of the way up. I'm very impressed with the sound quality. I have the volume on 32 and it plays the midbass beats on Top Back, Xxplosive, What's the Difference, and The Watcher pretty well without distortion. I cut the rear deck too. When I played Da Blow on a cd, once I got to volume 30 the CD skipped lol. The coins in my ashtray were bouncing around and my ipod was sliding across the cup holder. I shut the doors and trunk and played different songs on volume 30 or 32 and looked at the car from the outside. The trunk is still flexing a little, but I did notice a strange high pitched buzzing noise that seemed to be coming from the top of my rear window. I pressed down on the top of the window a little and it sounded like it was going to crack.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  6. electrolytic

    electrolytic Full Member

    Nice speakers! Still have the kickers?
     
  7. eazy

    eazy Full Member

    Kickers? I had MTX 5x7's up front and MTX 6x9's in back, then 5.25 CDT components up front and the MTX 5x7's in back, then just the MTX 5x7's in front... unless you're talking about my CVR12's and 400.1's that I sold?
     
  8. electrolytic

    electrolytic Full Member

    oh ok, i meant the cvr12s, i forgot you got the FI.
     
  9. electrolytic

    electrolytic Full Member

    How big is your box and what's it tuned to, i just watched your vids again.
     
  10. eazy

    eazy Full Member

    4 cubes @ 32Hz with 58.5 sq. inches of port... I think I turned the gain up a hair since the vids... maybe the Q needed to be broken in, because it seems like I've got more excursion now.
     
    Last edited: Mar 9, 2008
  11. sl0wm03

    sl0wm03 Full Member

    Did you paint your car? I've never seen that color before.
     
  12. eazy

    eazy Full Member

    Yeah, high light blue pearl.
     
  13. aznboi3644

    aznboi3644 Full Member

    I thought it looked a little gayer...lol
     
  14. eazy

    eazy Full Member

    I ordered a pac200 to protect my kinetiks... hopefully it won't hurt my voltage.

    [​IMG]

    I want to get one of these to monitor my 1000D when I'm driving... will there be a voltage drop from resistance? like say 13.9v at the amp and it reads 13.8v up front?
     
  15. pedro quiroga

    pedro quiroga Well-Known Member

    i was looking to get on of those too. i know a guy that runs it from his deck.says its fairly accurate
     
  16. aznboi3644

    aznboi3644 Full Member

    probably not any voltage drop from the volt meter...Just use some 16 gauge wire to make sure
     
  17. sl0wm03

    sl0wm03 Full Member

    it looks nice, did you do any work to the bumper or to the exhaust/tips? My exhaust is strait, I see that yours curves to the side and has spot in the back bumper for it, because I was gonna get a new tip that was shiny, then I'm gonna get some chrome to go above my wheel wells.

    This is my baby

    [​IMG]
     
  18. cccullen

    cccullen Full Member

    I think he's got a catback on his grand marquis
     
  19. CadillacETC1997

    CadillacETC1997 Well-Known Member

    taken care of
     
  20. eazy

    eazy Full Member

    I changed the exhaust a few months ago. I don't have mufflers or rear cats... just front cats, an H pipe, and some straight pipes.
    [​IMG]