My Slow Arse Finally Got It Done.

Well I finally finished the body work on the enclosures. They are now off getting covered in vinyl. Anyway, here's some pics:









I am now working on the electrical. I ran two 4 awg power wires to where the amps will be mounted, as well as the speaker wires. I now have to run the ground wires and RCA's. I also put in the port. I am using 4" dryer vent (as suggested by Dan) and am running it under the enclosure where the spare tire would reside. Underneath that is the battery. Here's a picture of the port:





My next job is to fiberglass the top of the dash in one of the 944's. They want it to be painted, so there will be a great deal of body work to do. I hope I get it done this year. :bye:

Steven Kephart
Adire Audio

 

Sorry. Here's the original: http://caraudiotalk.com/forum//index.php?s...3017&hl=porsche

And here's the next thread about it: http://caraudiotalk.com/forum//index.php?s...3105&hl=porsche

Steven Kephart
Adire Audio

 

They will be completely covered, but I'm not too worried about them as it is a large area and they both have fans.

Steven Kephart
Adire Audio

 

On one of those links above I have a link to my webpage where I show how I make them. Or you can click on my name and "visit my homepage". I believe it is page 7.


<!--QuoteBegin-hobbes26@Oct 4 2004, 02:15 AM
How does the port attach to the box? And are you securing the other end somewhere?

Man, that looks exactly how it was before when I saw it in person!!! lol

[post=22404]Quoted post[/post]​

[/quote]

I did some body work since you last saw them, but yes it took way too long.

As for the port, I just cut a hole for it to go through the plastic cover and through the bottom of the enclosure. I still haven't figured out how I'm going to permanently attatch and seal it.

Steven Kephart
Adire Audio

 

Ok, here are some pics of them vinyl covered. They haven't been color matched yet though.







Here's the hole for the 4" port to go into the enclosure. The port actually sits under the enclosure in the spare tire well.



Steven Kephart
Adire Audio

 

No, it should act like a regular port. I asked Dan about this, and he said it should be fine. It isn't sealed in there or anything.

And thanks guys. The vinyl is finally dyed the proper color. I just have to finish mounting the amplifiers and it will be done.

Steven Kephart
Adire Audio