Zapco C2K Amps

Discussion in 'General Car Audio Discussions' started by Snausages01, Jan 7, 2003.

  1. Snausages01

    Snausages01 Full Member

    Well I just found out today that Zapco no longer makes the Reference series amps, and of course my amps didn’t get shipped :angry: . But it kind of is a good thing because we found out today that most of them were ‘b-stock’ amps so I'm kind of glad I did not get those. Well now here's my dilemma:

    Should I get three Zapco C2K 6.0s for the subs and highs?
    If I go this route I will be getting 150x2 for the highs and about 1000 watts per sub.

    OR

    Should I get two Zapco C2K 6.0s for the subs and one Zapco C2K 4.0 for the highs?
    If I go this way I will take the 4.0, which is a 4 channel amp, and bridge it down to two channels and get about 340 watts a channel. As far as the subs it will be the same as above, about 1000 watts per sub.

    So which would you do? Im leaning towards the three 6.0s.

    Also the Focals are rated at 100 wrms and 200 wm.
     
  2. chadillac3

    chadillac3 Full Member

    I voted for the two 6.0's and the one 4.0

    Gives you more options.