Woud the POWER ACOUSTIK OV1-2000D amp be a suitable amp for 2 15" kicker cvr subs. that should put me at about 450watts a sub at 2ohms. and is that about how much power I want to be feeding them?
look for an amp that is in your price range...then get the subs either 2 or 4 ohm...i would get a mono amp that goes to 1 ohm...then get 2x4ohm subs...that will put you at 1 ohm. Get the most out of the amp.
i think that amp is at a great price...i like power acoustick amps...i have one right now w/ 2 15 audiopipes and it makes them bang really hard
if you would go to 1ohm. what would be a decent amp for about 150 give or take a little that would push the 15's and be 1ohm stable and how hard do i actually want to push them? do i want to push all 500watts rms per sub that they can handle or a bump down from that? thanks
Crunch PZi 1500.1 - PowerZone Series Monoblock Class AB Car Amplifier • 375W x 1 chan. @ 4 ohms • 750W x 1 chan. @ 2 ohms • 1500W x 1 chan. Max • Wired remote bass level control included • MOSFET power supply • Silver-coated RCA level inputs - , Car
just curious but wouldnt that be pushing to much to the speakers at 1 ohm. 750watts rms per sub? i believe theyre only rated for 5oo?
just set the gain on the amp down a little. Who know's...you might need 2 more after a bit and you will already have the power to push'em
they will fry from distortion first. 1500 rms from a 150 dollar amp? i find hard to believe, but if you get it dont use the bass boost and keep the gain hella low. if that amp was low thd and 1500 rms wouldnt we all have one? seriously.