how should i wire my setup? plz!

[adamvogt28]

hey guys i just joined the forums...i have a question. ok well first let me start off by telling you guys what i have, i have 2 12 inch jl audio w3v2 with 6 ohm imp. each. and for my amp i have a memphis mono d class 1100 watt amp. ok so what i want to know is how i should wire my subs. my amp is 1 ohm stable and puts out 1100 watts at 1 ohm, 600 @ 2 ohms , and 300 @ 4 ohms. right now i have my subs wired in parallel, but seperate.(each sub is in parallel, so im using 2 terminals, sorry im not good at explaining stuff) any way, i THINK if i wire both subs together in parallel, i should be running my subs @ 1.5 ohms right? and therefore they would be louder correct? im not sure but i think since i have my subs wired in parallel but seperate, they are at 3 ohms. i dont know much about wiring in parallel or series, so any help would be greatly aprreciated.
thanks
adam

[Hautewheeler]

you are correct.. if you wire these in parallel to eachother, then together you will get max output from your amp, and since the amp is 1 ohm stable in mono configuration, you will be fine..

see, you're smarter than you give yourself credit for..