|
I got very busy today and was not able to copy the directions. If you can post a pic of the dash I can tell you how to get the radio out. If you do not have a removable panel under the radio, then the two screws are one on each side. If this is the case, much of the dash needs to be disasenbled to get to the mounting screws. Its not difficult but you need to take your time. Do Not Tear Up Your Car. All you need is a philips and 8mm wrench to dissassemble the dash. Nothing else.
I will get those directions.
FINALLY THE DIRECTIONS
If there is a screw missing, its not my fault
1. Remove 2 phillips screwsfrom the bottom edge of the glove box door and remove the door.
2. Remove 3 screws (philips) from the panel under the steering column. Remove the panel by pulling straight down.
3. The screws holding the panel under the climate controls are now exposed. Four screws hold this panel on. Two on each side. (pillips)
4. Finally remove 2 8mm hex-head screws securing the bottom rear of the factory head unit.
5. The radio pushes straight out through the front.
Told you it was not hard. Just a lot of stuff. The number of screws you need to remove is correct.
Take your time, it aint rocket science.
__________________
The moving power of mathematical invention is not reasoning but imagination.
Augustus de Morgan
Truth does not change because it is, or is not, believed by a majority of the people.
Giordano Bruno
Last edited by Ranger SVO : 08-18-2006 at 08:21 PM.
|